VC4710
References
Occupational Exposure to Respirable Crystalline Silica Rule 29 CFR 1926.1153

Employer may rely on objective data from the manufacturer, providing evidence the exposure level is below the permissible exposure limit (PEL) of ≥ 50 averaged over an 8 hour work day when a task is performed, under the tested conditions.


Makita performed testing to determine the operator’s exposure level to respirable crystalline silica dust. The purpose of the test was to produce “objective data” required for compliance under the exposure assessment option of OSHA respirable crystalline silica standard, 29 CFR 1926.1153(d)(2)(ii) when the task is performed under the same conditions tested by Makita.


OSHA_Compliance_Catalog OSHA_Compliance_Flyer
Makita Product Guide towards Compliance of OSHA Respirable Crystalline Silica Rule 29 CFR 1926.1153   Makita Product Summary towards Compliance of OSHA Respirable Crystalline Silica Rule 29 CFR 1926.1153
Makita OSHA Silica Compliance Catalog   Makita OSHA Silica Compliance Summary Flyer
Objective Test Data

Objective Test Data for Concrete Drilling
with DX01 and XRH01Z

Objective Test Data for Concrete Drilling
with XCV05Z and XRH05Z

Objective Test Data for Concrete Drilling
with XCV05Z and HR2641

XRH011TX

Click for Details
XCV05ZX_XRH05PT

Click for Details
XCV05ZX_HR2641

Click for Details

Objective Test Data for Concrete Drilling
with HR2661 and HR2651

Objective Data Testing for 7" Concrete Surfacing/Grinding with GA7011C and VC4710

 
HR2661_HR2651

Click for Details
vc4710x1

Click for Details